Cm-ht12 / nt hasken rana wutar lantarki fitilu LED Lights
Heliport ambataccen tsarin yana tabbatar da cewa tsarin haske na hoto ba shi da ƙasa da 10 lux.
Bayanin samarwa
Yarda
| - Icao Annex 14, Voraɗi Ni, Na takwas Edition, wanda aka yi kwanan watan Yuli 2018 |
● Dukkanin aluminum labuloy, nauyi nauyi, babban ƙarfin tsari, lalata ƙarfin lalata, kuma kyakkyawan ƙuruciya mai zafi.
● shigo da tushen hasken wuta, tsawon rai, ƙarancin iko da babban haske.
Gilashin Exit mai haske shine gilashin tasiri, wanda yake da kyakkyawar yanayin tasiri, tsayayyen yanayi na 500 ° C), kyakkyawar haske mai sauƙi (har zuwa 97% haske mai haske), juriya na haske), juriya na haske, da juriya na UV. Mai riƙe fitilar an yi shi da riguna na ruwa mai ruwa, tare da maganin oxidation a farfajiya, an rufe shi sosai, mai hana ruwa-juriya.
● An tsara mai tunani dangane da ka'idar gani tana da adadin amfani da sauri fiye da 95%. A lokaci guda, zai iya sa hasken kusurwar ƙarin daidai da ingantaccen kallo, gaba ɗaya kawar da gurbataccen haske.
Haske na hasken rana fari ne ya jagoranci rayuwa mai tsayi, mai ƙarancin ƙarfi, coparfin counterarfin copperarfin (asarar rai na sama), tare da zafin jiki na 5000K.
Halibin na'urar haske gaba daya ya dauki cikakken tsari na kafa, wanda yake da tsayayya da tasiri, rawar jiki da lalata, kuma ana iya amfani dashi na dogon lokaci a cikin mahalli mahalli. Tsarin haske ne da ƙarfi, kuma shigarwa mai sauki ne
| Sifofin haske | |
| Aiki na wutar lantarki | AC220V (sauran akwai) |
| Amfani da iko | ≤60w |
| Luminous flx | ≥10,000lm |
| Tushen haske | Led |
| Source mai haske yana zaune | 100,000hours |
| Launi mai launi | Farin launi |
| Kariyar ciki | Ip65 |
| Tsawo | ≤2500m |
| Nauyi | 6.0 |
| Gaba daya girma (mm) | 40mm × 263mm × 143mm |
| Siyarwar shigarwa (mm) | Ø220mm × 156mm |
| Hasken wutar lantarki na hasken rana | 5V / 25W |
| Hasken rana na hasken rana | 430 * 346 * 25mm |
| Baturin Lititum | DC3.20V / 56H |
| Girman kai (mm) | 430 * 211 * 346mm |
| Abubuwan Muhalli | |
| Ranama | -40 ℃ ~ 55 ℃ |
| Saurin iska | 80m / s |
| Tabbacin inganci | Iso9001: 2015 |
Hanyar shigarwa
Shigar da fitilar kamar yadda aka nuna a cikin adadi a ƙasa. Kafin kafuwa, anga ya kamata a yi amfani da (idan aka yi amfani da makarantun fadada, babu buƙatar pre-saka su).
● Sanya fitilar a kwance, da kuma ƙafafun anga ya tabbatar da tabbaci da aiki.
● Farkon da aka kwance malam buɗe ido na ƙwayoyin batir ɗin kuma fitar da chassis.
● Shigar da Chassis
● Buɗe akwatin akwatin kuma saka toshe batirin a cikin allon sarrafa.
● Buɗe akwatin akwatin kuma saka toshe batirin a cikin allon sarrafa.
● Shigar da akwatin baturi Akwatin a kan mai sauƙin nada na Chassis kuma ƙara karfafa sawun mai fasa. Shigar da eriyar a bayan akwatin batir. Hakkin eriyar kamar yadda aka nuna a cikin adadi da ke ƙasa don guje wa buɗe murfin kuma murƙushe eriya.
● Gaba da fitilar da masu haɗin fitila da hasken rana a cikin akwatin batir da ƙara haɗi.
